# Can't get passed unity logo on launch

**URL:** <https://forums.snapshotgames.com/t/cant-get-passed-unity-logo-on-launch/4113>\
**Category:** Phoenix Point\
**Created:** [September 5, 2019, 5:21am UTC](https://forums.snapshotgames.com/t/cant-get-passed-unity-logo-on-launch/4113 "2019-09-05T05:21:26Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Anjovi](https://avatars.discourse-cdn.com/v4/letter/a/e9c0ed/32.png) [@Anjovi](https://forums.snapshotgames.com/u/Anjovi)\
**Post date:** [September 5, 2019, 5:21am UTC](https://forums.snapshotgames.com/t/cant-get-passed-unity-logo-on-launch/4113/1 "2019-09-05T05:21:26Z")

</div>

When I launch the game on the epic store, I get the options like graphics settings, window mode?, etc. but when i go to launch the game i just get the black screen following the unity logo.

I do see the game mouse cursor, but no audio or graphics to indicate that anything has loaded.

I’ve got a i7-3770 processor and an amd rx480 graphics card. I was able to run earlier versions fine.

Just thought i’d let you know.

* * *

edit: as I wrote this forum post, the game actually loaded. I’ll check back in later to see if this problem persists (the long loading)

---

<div class="post-metadata">

**Author:** ![randyrenaldo](https://avatars.discourse-cdn.com/v4/letter/r/59ef9b/32.png) [@randyrenaldo](https://forums.snapshotgames.com/u/randyrenaldo)\
**Post date:** [September 5, 2019, 11:35am UTC](https://forums.snapshotgames.com/t/cant-get-passed-unity-logo-on-launch/4113/2 "2019-09-05T11:35:13Z")

</div>

It actually happened to me as well. What do you do to successfully load the game then?

---

<div class="post-metadata">

**Author:** ![Yokes](https://yyz2.discourse-cdn.com/flex036/user_avatar/forums.snapshotgames.com/yokes/32/310_2.png) [@Yokes](https://forums.snapshotgames.com/u/Yokes)\
**Post date:** [September 5, 2019, 11:44am UTC](https://forums.snapshotgames.com/t/cant-get-passed-unity-logo-on-launch/4113/3 "2019-09-05T11:44:51Z")

</div>

Wait patiently.

---

<div class="post-metadata">

**Author:** ![samshell](https://yyz2.discourse-cdn.com/flex036/user_avatar/forums.snapshotgames.com/samshell/32/446_2.png) [@samshell](https://forums.snapshotgames.com/u/samshell)\
**Post date:** [September 5, 2019, 12:20pm UTC](https://forums.snapshotgames.com/t/cant-get-passed-unity-logo-on-launch/4113/4 "2019-09-05T12:20:03Z")

</div>

> [@randyrenaldo](#):
>
> What do you do to successfully load the game then?

You wait. For me the game takes quite some time to initiate, minutes even. After that, it’s a smooth sail

---

<div class="post-metadata">

**Author:** ![Anjovi](https://avatars.discourse-cdn.com/v4/letter/a/e9c0ed/32.png) [@Anjovi](https://forums.snapshotgames.com/u/Anjovi)\
**Post date:** [September 5, 2019, 2:57pm UTC](https://forums.snapshotgames.com/t/cant-get-passed-unity-logo-on-launch/4113/5 "2019-09-05T14:57:28Z")

</div>

I’ll just echo the waiting thing to as that’s essentially all it took for me (it might take a few minutes of black screen), assuming that you have a relatively decent computer.

What I’d add: If you at least see the mouse cursor for the game (not the windows mouse cursor…heh) I’d assume that the game will probably load if you wait long enough.